• Dynamic behaviour and suction characteristics of CH combination soil 

  Pandey, Saloni Prashant (Indian Institute of Technology Gandhinagar, 2018)
• On the causes of observed and projected changes in daily and sub daily precipitation extremes in major urban areas in India 

  Ali, Haider (Indian Institute of Technology Gandhinagar, 2018)
• Influence of a gap between column and masonry wall on the response of masonry infilled reinforced concrete frame 

  Sonpal, Ashutosh (Indian Institute of Technology Gandhinagar, 2018)
• Climate controls on shallow and deep groundwater storage in western India 

  Meghwal, Rakesh (Indian Institute of Technology Gandhinagar, 2018)
• Experimental study and analytical modeling of a plasterboard suspended ceiling system with free perimeter support 

  Matale, Sujit Vasant (Indian Institute of Technology Gandhinagar, 2018)
• Study of cement mortar reinforced with water soluble polymer as admixture for high temperature applications 

  Shah, Harsh Janakkumar (Indian Institute of Technology Gandhinagar, 2018)
• Experimental investigation of scour around bridge pier under pressurized flow condition 

  Gupta, Rajat Kumar (Indian Institute of Technology Gandhinagar, 2018)
• Computationally efficient 1-D line element for modeling 3-D heat transfer in structural system 

  Hasanth, Kota Sarana (Indian Institute of Technology Gandhinagar, 2018)
• Effect of stress history on stress-strain and volumetric response of laterite soil under undrained and drained conditions 

  Abhijith, T K (Indian Institute of Technology Gandhinagar, 2018)
• Effect of interaction factors on modelling of piled raft foundation 

  Kamal, Vikalp (Indian Institute of Technology Gandhinagar, 2017)
• Design of facility for full scale testing of structural elements under fire senarios 

  Nandurkar, Akshay (Indian Institute of Technology Gandhinagar, 2018)
• Case study of slope failures in canals 

  Basheer, Amjeth (Indian Institute of Technology Gandhinagar, 2017)
• Experimental studies on interpretation of GPR data for various applications 

  Sunnda (Indian Institute of Technology Gandhinagar, 2017)
• Comparative study of fire ratings of reinforced concrete beams and columns calculated through different analytical, empirical and codal methods 

  Lambhate, Harshal (Indian Institute of Technology Gandhinagar, 2017)
• Study on the macro models to simulate the seismic response of masonry-infilled reinforced concrete frames 

  Ghosh, Rajdeep (Indian Institute of Technology Gandhinagar, 2018)
• Blast pressure calculation and response of column subjected to blast loads using a simplified method 

  Deshpande, Kaustubh (Indian Institute of Technology Gandhinagar, 2018)
• Failure mechanisms in low rise RC framed building with masonry infills under seismic loading 

  Khokhar, Rimpy (Indian Institute of Technology Gandhinagar, 2017)
• Flow past a sand mining pit 

  Joshi, Pariveeksha (Indian Institute of Technology Gandhinagar, 2017)

  In the present thesis, evolution of bed due to sand mining is studied by one dimensional flow and sediment modeling using HEC-RAS 5 (Hydrologic Engineering Centre - River Analysis) Software. HEC-RAS uses continuity and ...
• Design methodology of ash dyke using geosynthetics considering hydraulic conditions 

  Soni, Shubham (Indian Institute of Technology Gandhinagar, 2017)

  Ash dyke is an earthen embankment which is constructed at every thermal power plant for disposal of fly ash slurry. Seepage of water takes place into the dyke from the fly ash slurry. In order to control the seepage inside ...
• Effect of in-plane boundary conditions on buckling and post buckling response of thin plates under uni-axial compression/in-plane shear 

  Botlapati, Sri Sahith (Indian Institute of Technology Gandhinagar, 2017)

  The present investigation comprises study on the buckling and the post buckling behaviour of thin plates with and without a cutout. The plate is subjected to a uniform uni-axial compression and/or in-plane shear. Both ...

View more