Browsing Conference Papers by Title

Now showing items 1-20 of 66

Adding a resistance heat source during Friction Stir Welding

Arora, Amit; Sahlot, Pankaj; Banjare, Pragya N. (TMS, 2015-03)
Aluminium-molybdenum system by friction stir surface alloying process

Arora, Amit; Mahesh, V. P. (IIT Kharagpur, 2016-11-05)
Annealing induced electronic defect state transformation in Al-doped ZnO films

Bandaru, Narendra; Panda, Emila (Indian Institute of Technology Kanpur, 2017-01-02)
Annealing induced transformation and enhancement in the electronic defect states for AZO thin films

Bandaru, Narendra; Panda, Emila (2018-06-18)
Challenges and opportunities with regard to environmental issues in non ferrous sector with special reference to aluminum

Mukhopadhyay, Jyoti (2012-11-16)
Characterization of pineapple leaf fibers and graphene oxide reinforced rice starch bio composite

Bhadane, Prathmesh; Mishra, Abhijit (18-02-22)
Characterization of second phase particles in twin-roll cast aluminum alloy AA 8011

Patel, Sooraj; Mukhopadhyay, Jyoti (2022-02-27)
Copper vacancy induced varying optoelectronic properties of Cu2-xS films

Patel, Tvarit; Panda, Emila (2019-05)
Design optimization & fabrication of 3"?3" flexible polymer solar modules

Putta, Veerender; Sridevi, C.; Gupta, Deeksha; Bhaiya, Kaushik; Koiry, S. P.; Jha, P.; Chauhan, A. K.; Muthe, K. P. (2019-12-18)
Determination of bending limit curves for aluminium alloy AA6014-T4: an experimental approach

Saxena, Krishna Kumar; Mukhopadhyay, Jyoti; Das, Ipsita Madhumita (Springer verlag, 2016-02-14)

The conventional forming limit curves as proposed by Keeler and Goodwin fail to evaluate formability in case of bending and hemming operations. This is due to the different failure mechanisms involved in biaxial forming ...
Developing self-disinfecting surface coatings using antimicrobial peptides

Majhi, Sasmita; Mishra, Abhijit (2016-12-11)
Early failure detection of biomedical implants using stable isotopic tracer

Malvi, Bharti; Misra, Superb K.; Balasubramanian, C.; Asokan K (22-07-21)
Effect of actual thermo-physical properties on heat transfer and materials flow for dissimilar materials Al 6061-T6 and AZ31

Singh, Amit Kumar; Shalot, Pankaj; Arora, Amit (2019-03-10)
Effect of anisotropy on stress-strain & pore pressure response of micaceous sand under undrained compression loading conditions

P., Seethalakshmi; Sachan, Ajanta (2017-12-14)
Effect of friction stir processing on the surface hardness of Aluminium-Molybdenum surface composites

Mahesh, V. P.; Arora, Amit (2019-06-26)
Effect of machining parameters on surface roughness in μ-EDM of conductive SiC

Saxena, Krishna Kumar; Agarwal, Sanjay; Mukhopadhyay, Jyoti (ASME, 2014-11)
Effect of solid lubricant on surface quality in turning of Al 6061 alloy

Srivastava, Anand Suman; Agarwal, Sanjay; Saxena, Krishna Kumar (ASME, 2014-11)
Energy and cost-efficient transportation of minerals and tailings in the slurry form

Prasad, Vighnesh; Thareja, Prachi; Mehrotra, S. P. (2018-09-17)
Estimation of tool wear during friction stir welding of CuCrZr alloy

Sahlot, Pankaj; Arora, Amit (2016-05-17)
Experimental characterization of metal matrix composite with aluminium matrix and Molybdenum powders as reinforcement

Arora, Amit; Astarita, A.; Boccarusso, L.; Mahesh, V. P. (2016-09-07)

This paper is on the successful fabrication of Metal Matrix Composite (MMC) using an Aluminium plate and Molybdenum powder by Friction Stir Process (FSP). The aim was to produce a superficial MMC layer on the Al plate in ...

Now showing items 1-20 of 66

Search Digital Repository

Browse

All of DSpace
This Collection
- Titles
- Authors
- By Advisor
- By Issue Date
- Subjects
- By Type
- By Degree
- By Department

Browsing Conference Papers by Title

Browsing Conference Papers by Title

Search Digital Repository

Browse

All of DSpace

This Collection

My Account