• Processing of low grade iron ores and their effective usage for ironmaking 

  Mehrotra, S. P.; Singh, Ratnakar (12/11/2017)
• Deformation mechanisms of vertically stacked WS2 /MoS2 Heterostructures: the role of interfaces 

  Susarla, Sandhya; Manimunda, Praveena; Morais Jaques, Ygor; Hachtel, Jordan A.; Idrobo, Juan Carlos; Amnulla, Syed Asif Syed; Galvão, Douglas Soares; Tiwary, Chandra Sekhar; Ajayan, Pulickel M. (American chemical society, 2018-04)

  The mechanical and optical properties generated due to the stacking of different atomically thin materials have made it possible to tune and engineer these materials for next-generation electronics. The understanding of ...
• Morphology controlled Graphene-Alloy Nanoparticles Hybrids with Tunable carbon monooxide absorption 

  Manolata Devi, M.; Dolai, N.; Sreehala, S.; Morais Jaques, Ygor M.; Mishra, R. S. Kumar; Galvao, D. S.; Tiwary, Chandra Sekhar; Sharma, Sudhanshu; BISWAS, K. (Royal Society of Chemistry, 2018-04)

  Selective oxidation of CO to CO2 using metallic or alloy nanoparticles as catalysts, can solve two major problems of energy requirements and environmental pollution. Achieving 100% conversion efficiency at a lower temperature ...
• An overview of system input & structural parameter's influence on optoelectronic properties in AZO thin films 

  Rawat, Priyanka; Srinivasan, Babji; Panda, Emila (1/29/2018)
• Intrinsic defect-induced modification in morphology and optoelectronic properties for Sn-rich SnS 

  Singh, Chetan; Panda, Emila (1/29/2018)
• Annealing induced transformation and enhancement in the electronic defect states of AZO thin films and their correlation with electrical properties 

  Bandaru, Narendra; Panda, Emila (1/29/2018)
• Wear-induced changes in FSW tool pin profile: effect of process parameters 

  Sahlot, Pankaj; Jha, Kaushal; Dey, G. K.; Arora, Amit (Springer Verlag, 2018-03)

  Friction stir welding (FSW) of high melting point metallic (HMPM) materials has limited application due to tool wear and relatively short tool life. Tool wear changes the profile of the tool pin and adversely affects weld ...
• Surface immobilization Of Antimicrobial Peptide (AMP) for use in antibacterial coating 

  Majhi, Sasmita; Arora, Ankita; Mishra, Abhijit (2018-03-05)
• Synthesis Of lysine mimicking antibacterial polymers 

  Arora, Ankita; Majhi, Sasmita; Zheng, Wan; Liang, Hongjun; Mishra, Abhijit (2018-03-05)
• Applications of synchrotron‐based spectroscopic techniques in studying nucleic acids and nucleic‐acid‐based nanomaterials 

  Wu, Peiwen; Yu, Yang; McGhee, Claire E.; Tan, Li H.; Mishra, Abhijit; Wong, Gerard; Lu, Yi (Wiley-VCH Verlag GmbH & Co. KGaA, 2018-02)

  This chapter summarizes the applications of synchrotron‐based spectroscopic techniques used to characterize nucleic acids. It reviews a few examples that illustrate some of the important principles governing the assembly ...
• Synthesis of CdO/ZnS heterojunction for photodegradation of organic dye molecules 

  Reddy, Ch. Venkata; Bandaru, Narendra; Shim, Jaesool; Vattikuti, S. V. Prabhakar (Springer Verlag, 2017-06)

  CdO, ZnS, and CdO/ZnS hybrid photocatalyst were prepared using a simple co-precipitation method, and its photocatalytical activity was studied. The materials were characterized using powder XRD, TEM, HRTEM, BET, Raman, ...
• Atomically thin gallium layers from solid-melt exfoliation 

  Kochat, Vidya; Samanta, Atan; Zhang, Yuan; Bhowmick, Sanjit; Manimunda, Praveena; Asif, Syed Asif S.; Stender, Anthony S.; Vajtai, Robert; Singh, Abhishek K.; Tiwary, Chandra S.; Ajayan, Pulickel M. (American Association for the Advancement of Science, 2018-03)

  Among the large number of promising two-dimensional (2D) atomic layer crystals, true metallic layers are rare. Using combined theoretical and experimental approaches, we report on the stability and successful exfoliation ...
• Immobilization of designed antimicrobial peptide for use in antibacterial surfaces 

  Majhi, Sasmita; Arora, Ankita; Mishra, Abhijit (2018-02)
• Development of processing map and constitutive relationship for thermomechanical processing of Aluminum Alloy AA201 

  Narayana Murty, S. V. S.; Sarkar, Aditya; Narayanan, P. Ramesh, (Royal Society of Chemistry, 2018-01)

  Isothermal hot compression tests were performed on aluminum alloy 2014 (AA2014) to study the evolution of microstructure over a wide range of temperatures (300°C–500°C) and strain rates (0.001–100 s−1). The true stress–true ...
• Simple, inexpensive way of fabricating high quality Zn(O)S nanoparticles by varying pH 

  Dwivedi, Deepak; Patel, Tvarit A.; Panda, Emila (Elsevier, 2018-06)

  In this work, a simple, inexpensive room temperature chemical bath deposition is proposed to synthesize high-quality Zn(O)S nanoparticles of varied composition. The band gap of these nanoparticles is found to alter by ...
• Origami-inspired 3D interconnected molybdenum carbide nanoflakes 

  Koizumi, Ryota; Ozden, Sehmus; Samanta, Atanu; Alves, Ana Paula P.; Mishra, Avanish; Ye, Gonglan; Silva, Glaura G.; Vajtai, Robert; Singh, Abhishek K.; Tiwary, Chandra S.; Ajayan, Pulickel M. (Wiley, 2018-01)

  High-temperature stable transition metal carbides are one of the promising classes of materials for next-generation energy applications such as water splitting catalysis and electrodes for energy storage devices. Herein, ...
• Surface immobilization Of antimicrobial peptide (AMP) for use in antibacterial coating 

  Majhi, Sasmita; Arora, Ankita; Mishra, Abhijit (American Physical Society, 2018-03-05)

  Bacterial colonization leading to biofilm formation on surfaces is a common threat to patient safety and health care units. One approach to address this prevailing problem is to develop antibacterial coatings on such ...
• High stiffness polymer composite with tunable transparency 

  Owuor, Peter Samora; Chaudhary, Varun; Woellner, Cristiano F.; Sharma, V.; Ramanujan, R.V.; Stender, Anthony S.; Soto, Matias; Ozden, Sehmus; Barrera, Enrique V.; Vajtai, Robert; Galvao, Douglas S.; Lou, Jun; Tiwary, Chandra Sekhar; Ajayan, Pulickel M. (Elsevier, 2018-01)

  Biological materials are multifunctional performing more than one function in a perfect synergy. These materials are built from fairly simple and limited components at ambient conditions. Such judicious designs have proven ...
• Effect of anisotropy on stress-strain & pore pressure response of micaceous sand under undrained compression loading conditions 

  P., Seethalakshmi; Sachan, Ajanta (2017-12-14)
• Antibacterial activity of antimicrobial peptide (AMP) grafted polystyrene surface 

  Majhi, Sasmita; Arora, Ankita; Mishra, Abhijit (2017-11-23)

View more